Rubber Covered Magnetic Pad MagPad-3 Car Roof Magnet

/Rubber Covered Magnetic Pad MagPad-3 Car Roof Magnet
  • Rubber Covered Magnetic Pad MagPad-3 Car Roof Magnet
Primary Competitive Advantages:
  • We are A Professional Permanent Magnets & Magnetic Assemblies Company Operating Since 2004
  • All Magnetic Grade for Sintered & Bonded Magnets
  • Our Quality Guaranteed
  • We Ship Worldwide
  • Small Orders Accepted
  • OEM Design Approvals
  • All Payment Accepted
  • Rubber Covered Magnetic Pad MagPad-3 Car Roof Magnet, Magnetic Holding Pad for Taxi, Adverting and Driving School Signs, Steel and Rubber Encased Pot Magnet Assembly Ferrite, Rubber Covered Magnetic System, Ferrite Magnetic Pad, MagPad, Rubber Coated Magnetic Mounting Pad, Taxi Magnet, Car Roof Top Magnets, Clamping Magnet Fixing Holding System Boutique Magnets, Waterproof Magnetic Base Mount Holder China Supplier

    Rubber Covered Magnetic Pad MagPad-3 Car Roof Magnet  Parameter:
    Item No.  MagPad-3
    Shape: Rectangle
    Magnetic Face: 104 x 53
    Thickness: 8mm
    Grade: Y30BH
    Vertical Pull (Kg): 8
    Slide Resistance (Kg): 4
    Max Temp (degrees C): 50
    Fixing: Magnetic Face
    Magnet material: Rubber covered ferrite magnets and Galvanized steel
    Magnet coating: Nickel (ni-cu-ni) or Zinc (zn)
    Max. work temperature: +120℃
    Colour: Silver and Black

    104mm x 53mm x 8mm thick with a 5mm diameter bolt
    Magnetised with a six-pole striped magnetic field on the 100 mm x 50mm magnetic pad
    Each magnet can support a steel weight of up to 8kg vertically from the magnetic face when in flush contact with a mild steel surface
    Rubber coated to increase friction and reduce corrosion

    The car roof top magnets is designed for applications where high shear strength is required with minimum scratching. The car roof magnet is a magnetic clamping assembly with a soft polyurethane coating. The soft polyurethane coating causes almost zero abrasion but gives a much higher surface friction. Most magnets have a strong direct pull force but they can be made to slide along a surface with about 20% of the direct pull force when used on steel. The car roof top magnet has a strong direct pull force but the increased friction of the polyurethane means that it takes around twice the direct pull force to get the magnet to slide. This means that the car roof top magnet resists sliding along a ferromagnetic steel surface better than magnets without the polyurethane coating. It can provide immense resistance to shear forces when mounted on a smooth metal surface, as typically found on motor vehicle body parts. Threaded Stud Magnetic Pad MagPads for Fixing Rooftop Signs to Vehicles

    This unique combination removes the risk of scratching paintwork – the polyurethane coating on the base of the magnet is relatively soft and therefore less likely to cause abrasion.

    The polyurethane coating of the car roof top magnet also reduces the peel strength of the magnet, making it easier to remove from the metal surface when used for either interior or exterior applications.

    For note, the car roof top magnet has zinc coated backing plates for corrosion resistance and come in various designs with screw holes or stud mountings.

    Typical uses include car roof signs, antenna clamp systems, vehicle tracking units, temporary signage, attaching to boards and pictures for clamping to metal partitions, etc. It is sometimes called a Taxi Magnet as it is used within the taxi signs attached to the car roof to hold them securely in place. Please be aware note that magnets will not attract to panels are made of non-magnetic materials such as aluminium or carbon fibre; the majority of car panels have ferromagnetic mild steel content which magnets will attract strongly onto.

    Another use is with use with doors. The unit can clamp onto mild steel strips on doors and provides a good clamping force with very little slip and low noise when clamping.

    The Car Roof Magnets is also ideal for lighting fixing assemblies. It clamps securely to mild steel walls and girders with no damage to paintwork and no slippage on vertical surfaces, making it a superb choice for temporary and permanent lighting fixings.

    error: Content is protected !!