Sensor AlNiCo Rod Magnet

/Sensor AlNiCo Rod Magnet
  • Sensor AlNiCo Rod Magnet
Primary Competitive Advantages:
  • We are A Professional Permanent Magnets & Magnetic Assemblies Company Operating Since 2004
  • All Magnetic Grade for Sintered & Bonded Magnets
  • Our Quality Guaranteed
  • We Ship Worldwide
  • Small Orders Accepted
  • OEM Design Approvals
  • All Payment Accepted
  • Sensor AlNiCo Rod Magnet, Cylinder AlNiCo Permanent Magnetoresistive Sensor Magnet, Cylindrical Aluminium-Nickel-Cobalt Reed Sensor Magnet, Position Sensor AlNiCo Permanent Magnet, Cylinder Sintered and Casting AlNiCo Magnets China Manufacturer

    Sensor AlNiCo Rod Magnet Technical Introduction
    Item No.: MPASNM series
    Magnet Size: Ø8X24MM
    Tolerances: ±0.004″
    Material: Aluminium-Nickel-Cobalt
    Grade of AlNiCo: AlNiCo500
    Shape:  Cylinder, Rod
    Max Temperature: 450℃
    Magnetization Direction: Axial or Diametrical
    Surface Gauss: Gauss

    Sensor AlNiCo Rod Magnet Grinding and Tolerances
    Alnico is hard and brittle (45-55 Rockwell C), and is not suitable for drilling, tapping or conventional machining operations. Holes are usually rough cast during the foundry process and magnets are cast close to their final size and then finish machined to closer tolerances if necessary. Adams provides in-house cutting and grinding to meet your application requirements.

    The most efficient utilization of Alnico magnets requires that they be magnetized after the magnet is assembled in the final magnetic circuit. Shipping the alnico magnets before magnetizing them also eliminates the need for special packaging and prevents contamination by potential contact with ferrous materials.

    Temperature Constraints and Demagnetization
    Alnico has the best temperature coefficient of any but the most advanced commercial magnet material, providing for excellent stability over a wide temperature range. A properly designed circuit using Alnico magnets will have a stable flux output during temperature fluctuations.

    Hall Effect Switches and Magnetoresistive sensors provide a single digital switching output (or relay output) that turns on when a magnetic field is present and then off when the magnetic field leaves. When paired with magnets these sensors can be used to measure speed or count or to confirm a position or alignment between the sensor and target magnet. cylinder alnico permanent magnetoresistive sensor magnet

    While all of our Neodymium magnets at MPCO Magnets have a strong hold with corresponding material, our Neodymium sensor magnets are one of the more intricate. Neodymium is the preferred type of component for magnets due to its strength, so when it comes to the most effective sensor magnets, MPCO Magnets offers the finest.

    Cylinder ALNICO5 Sensor Magnet Dimension
    ALNICO500 Ø4X12MM
    ALNICO500 Ø4X19MM
    ALNICO500 Ø6X20MM
    ALNICO500 Ø6X22MM
    ALNICO500 Ø5X20MM
    ALNICO500 Ø3X6MM
    ALNICO500 Ø3X55MM
    ALNICO500 Ø10X18MM
    ALNICO500 Ø5X15MM
    ALNICO500 Ø12X60MM
    ALNICO500 Ø7.9X25.4MM
    ALNICO500 Ø7X20MM
    ALNICO500 Ø7X21MM
    ALNICO500 Ø4.9X70MM
    ALNICO500 Ø11.9X70MM
    ALNICO500 Ø5X55MM
    ALNICO500 Ø4X28MM
    ALNICO500 Ø6X30MM
    ALNICO500 Ø6X60MM
    ALNICO500 Ø6.6X152.4MM
    ALNICO500 Ø9X100MM
    ALNICO500 Ø8X150MM
    ALNICO500 Ø4X8MM
    ALNICO500 Ø2.5X12.7MM
    ALNICO500 Ø5X10MM


    error: Content is protected !!