Injection Bonded Ferrite Magnets

/Injection Bonded Ferrite Magnets
  • Injection Bonded Ferrite Magnets
Primary Competitive Advantages:
  • We are A Professional Permanent Magnets & Magnetic Assemblies Company Operating Since 2004
  • All Magnetic Grade for Sintered & Bonded Magnets
  • Our Quality Guaranteed
  • We Ship Worldwide
  • Small Orders Accepted
  • OEM Design Approvals
  • All Payment Accepted
  • Injection Bonded Ferrite Magnets, Control Switch Injection Molded Ferrite Plastic Magnets, Anisotropic Ferrite MIM Permanent Magnets for Motor Rotor Shaft, Anisotropic and Isotropic Ferrite Sensor Magnet, Bonded Ferrite Magnetic Assemblies China Supplier and Factory

    Injection Bonded Ferrite Magnets Technical
    Material: Plastic Binders and Ferrite Powder
    Method: Injection Mold
    Part No.: MPBD-IM07F003
    Application:control switch
    Flux Force:per pole ≥0.5N
    Tolerance: ±0.1 mm
    Maximum Operation Temperature: 180 °C
    Delivery Time: 15-30 days
    Made in China

    The advantage of injection molded magnets
    For this kind of isotropic magnets, any magnetization direction can be applied. This is a congenital advantage to manufacture the multi-polar magnets.
    Injection molded magnets have excellent dimensional accuracy and serial productivity.
    Thin wall thickness and complex shape can be manufactured.
    Over-molding and insert-molding with other parts, like back yoke, hub, shaft is readily available, as well as injection other polymer parts can be incorporated.
    The polyer binders’s volume fraction of injection molded magnets higher than the compression molded magnets. It will provide adequate protection against corrosion without coating in most applications. other products: plastic isotropic ndfeb bonded magnets

    Ferrite Bonded Injection Magnets
    Ferrite Plastic Magnet has the features of low magnetic proprty and lower cost.
    ·Anisotropy Ferrite
    Magnetizing while the process of injection molding, it can greatly improve the product’s magnetic energy produce and could make (BH) reach to 1.60 MGOe–2.20 MGOe.
    It is a high ratio of performance materials, mostly used as a motor rotor.
    · Because of the toughness of the resin, it is not easy to be chipped and cracked.
    · Injection molding formation together with embedded parts such as a shaft is available, reducing assembly process.
    · Easy to make a complex shape, with higher degree of design freedom.
    · As cutting process is easy, it is convenient to make samples in design stage.

    error: Content is protected !!