Magnetic Hump
Introduction
Hump Magnets are made for gravity free-fall applications in magnetic separation free flowing products such as feed, grain, wood ships, food stuffs, sand or plastic where the material flow rate is high & nature of material is lumsy.
It also can be used for granular & powder like material.
Magnetic Hump
Magnetic hump consists of two Magnetic plates mounted in an offset direction & are installed in vertical housing.
Housings handle gravity, moderate positive and negative pressures. The angled shape directs the product flow into the magnetic field & also prevents the bridging & built up of material.
The material falling strikes directly on the first magnet changes direction and falls over the second magnet, ensuring clean outflow material.
For below tables refer this drawing for Round & square type Magnetic Hump
Magnetic Hump Round Shape
Magnetic Hump Square Shape
High intensity Magnetic Hump – for 4,500 ± 500 Gauss
ROUND SHAPE HIGH INTENSITY MAGNETIC HUMP (RHMH) – Permissible Max. Operating Temp. 80˚C
Model Inlet & outlet Dia.(mm) Total Height(mm) Total Attraction(inch) Magnetic Plate Size(mm) Magnetic Area(mm)
RHMH – 10 100 800 3” 205 x 105 x 46 HT 180 x 80
RHMH – 15 150 800 4” 255 x 155 x 46 HT 230 x 130
RHMH – 20 200 950 4” 305 x 205 x 46 HT 280 x 180
RHMH – 25 250 1100 4” 355 x 255 x 46 HT 330 x 230
RHMH – 30 300 1200 4” 405 x 305 x 46 HT 380 x 280
Peak flux density value 4,500 ± 500 Gauss, when measured on Magnetic Plate
Dimensions of Inlet & Outlet Connecting Flanges
Model Flange O.D.(mm) Hole Dia.(mm) No. Of Holes Hole PCD(mm) Flange THK.(mm)
RHMH – 10 228.6 19 8 190.5 6
RHMH – 15 279.4 22.2 8 241.3 6
RHMH – 20 342.9 22.2 8 298.4 8
RHMH – 25 406.4 25.4 12 361.9 8
RHMH – 30 482.6 25.4 12 431.8 8
High intensity Magnetic Hump – for 4,500 ± 500 Gauss
SQUARE SHAPE HIGH INTENSITY MAGNETIC HUMP (SHMH) – Permissible Max. Operating Temp. 80˚C
Model Inlet & outlet Dia.(mm) Total Height(mm) Total Attraction(inch) Magnetic Plate Size(mm) Magnetic Area(mm)
SHMH – 10 100X100 800 3” 205 x 105 x 46 HT 180 x 80
SHMH – 15 150X150 800 4” 255 x 155 x 46 HT 230 x 130
SHMH – 20 200X200 950 4” 305 x 205 x 46 HT 280 x 180
SHMH – 25 250X250 1100 4” 355 x 255 x 46 HT 330 x 230
SHMH – 30 300X300 1200 4” 405 x 305 x 46 HT 380 x 280
Peak flux density value 4,500 ± 500 Gauss, when measured on Magnetic Plate
Low intensity Magnetic Hump – for 1,500 ± 200 Gauss
ROUND SHAPE LOW INTENSITY MAGNETIC HUMP (RLMH) – Permissible Max. Operating Temp. 250˚C
Model Inlet & outlet Dia.(mm) Total Height(mm) Total Attraction(inch) Magnetic Plate Size(mm) Magnetic Area(mm)
RLMH – 10 100 800 4” 205 x 105 x 81 HT 180 x 80
RLMH – 15 150 800 5” 255 x 155 x 81 HT 230 x 130
RLMH – 20 200 950 6” 305 x 205 x 81 HT 280 x 180
RLMH – 25 250 1100 6” 355 x 255 x 81 HT 330 x 230
RLMH – 30 300 1200 6” 405 x 305 x 81 HT 380 x 280
Peak flux density value 1,500 ± 200 Gauss, when measured on Magnetic Plate
Dimensions of Inlet & Outlet Connecting Flanges
Model Flange O.D.(mm) Hole Dia.(mm) No. Of Holes Hole PCD(mm) Flange THK.(mm)
RLMH – 10 228.6 19 8 190.5 6
RLMH – 15 279.4 22.2 8 241.3 6
RLMH – 20 342.9 22.2 8 298.4 8
RLMH – 25 406.4 25.4 12 361.9 8
RLMH – 30 482.6 25.4 12 431.8 8
Low intensity Magnetic Hump – for 1,500 ± 200 Gauss
SQUARE SHAPE LOW INTENSITY MAGNETIC HUMP (SLMH) – Permissible Max. Operating Temp. 250˚C
Model Inlet & outlet Dia.(mm) Total Height(mm) Total Attraction(inch) Magnetic Plate Size(mm) Magnetic Area(mm)
SLMH – 10 100X100 800 4” 205 x 105 x 81 HT 180 x 80
SLMH – 15 150X150 800 5” 255 x 155 x 81 HT 230 x 130
SLMH – 20 200X200 950 6” 305 x 205 x 81 HT 280 x 180
SLMH – 25 250X250 1100 6” 355 x 255 x 81 HT 330 x 230
SLMH – 30 300X300 1200 6” 405 x 305 x 81 HT 380 x 280
Peak flux density value 1,500 ± 200 Gauss, when measured on Magnetic Plate
Features
The Z type design helps to break lumps & facilitate to trap embedded iron material from the product.
SS 304 & SS 316Stainless steel construction.
The High power magnetic plates are hinged type & can be easily cleaned periodically.
Most preferable for high volume poor flowing or abrasive materials.
Available in two variants i.e. High intensity with Flux density of 4500 +/-500 Gauss for & Low intensity i.e with Flux density of 1200+/-500 Gauss for attraction upto 4” distance.
Maintenance Free
No power supply required.
Efficient cost-saving recovery of harmful tramp iron in free-flowing materials
Why MPCO Magnetic Hump?
MPCO has been a Permanent Magnet Manufacturer for over 20 years and has great experience in design and development of Permanent Magnets and Magnetic Equipment.
Customized Design.
Services such as Magnetic calibration/Audit are available.
MPCO ‘s Magnetic Equipment are known to provide excellent Magnetic Separation of Material.
7″ Circular Grid Magnet Hopper Separator in SS304 Frame 2-Layers
8″ SUS304 316L Stainless Steel Grill Hopper Magnet Grate Filter 1-Layer 5 Bars
Magnetic Grills Hopper Magnet 7″ Round 1-Row
Rubber Coated Mag Pad MagPad-3 for Car Roof Signs, Antenna Clamp Systems
Separator Hopper Grill Magnet Round Type 7″ 1-Layer 3 Bars
6″ Round Grid Magnet Separator 304 Stainless Steel with Angular Baffles 2 Rows
20 x 5mm Round Disk Neodymium Iron Boron Magnet N42 Ni
45mm x 30mm Disc Super Strong Neo Magnet N45 Ni
15mm x 3mm Rare Earth NdFeB Disc Magnet N42SH Ni
