Operate the Powerful Mini Auto ON/OFF Lifting Magnets
Before reading the following chart, it is recommended that you first look at the two articles introducing MPCO Magnetics’ Mini Auto ON/OFF lifting magnets (Intro and Functions). This chart explains the operational actions to the Auto ON/OFF Lifting Magnet resulting in various functions and status of the magnet.
Operate the Powerful Mini Auto ONOFF Lifting Magnets
| Operations | Functions of the Magnet | The Display of Battery Level | Light of MAG | Light of Low Battery Level |
| Place the magnet anywhere on the ground and press the POWER button. | Demagnetized and holding force, if any, is cleaned out. | On | Off | Off |
| Lift and move the magnet to a load to be hoisted. | Keep demagnetized and no holding force. | On | Off | Off |
| Lay down the magnetic lifter slowly and place it on the load’s surface. | Magnetized to produce holding force to the load. | On | Green | Off |
| Lift the magnet with the load attracted and move them to destination. | Keep being magnetized with holding force, even if battery fails. | On | Green | Off |
| Lay down the lifting magnet and load slowly onto the ground | Demagnetized and its holding force is cleaned out. | On | Off | Off |
| Lift away the magnet alone. | Keep being demagnetized with no holding force. | On | Off | Off |
| Continues and repeat this operational procedure | ||||
| When the battery becomes low | The magnet stops working, but still keeps the latest status, with or without holding force. | Off | Same as its last status, Green or Off. | Yellow |
| If the light for MAG is green (the magnet is holding the load) and after the magnet stops working, lay down the magnet and load slowly onto the floor and then press the POWER button TWICE. | Demagnetized to cleaned out its holding force. | On then Off | Green then Off | Off then yellow |
| Finally, press the POWER button to turn off all lights. | ||||
