Microwave Ferrite Products
(1) The high power isolator for the industrial microwave oven
The usage: used as the protector for the magnetron in the foodstuff industrial oven, to let the magnetron work normally on the condition of large reflection power.
The technical index: the frequency: 2450 MHz (the power 5KW)
915 MHz (the power 10KW)
The isolation: 20 dB
The Inse.Loss: 0.5 dB
Microwave Ferrite Products
(2) The high power isolator for electron accelerator of medical appliance
The usage: used as the protector for the magnetron in the microwave system of the accelerator on the medical appliance.
The technical index: The frequency: 2998+/-5MHz
The power peak value 2MW 5MW
average 2KW 4KW
The isolation: 20dB
The Inse.Loss: 0.5dB
The frequency: 9370+/-10MHz
The power peak value 1MW 1.5MW
average 1KW 1.5KW
The isolation: 20dB
The Inse.Loss: 0.5dB
(3) The quick device
The usage: used on the radar or the radiometer
3.1 The quick switch: The frequency from Band K to Band S
The isolation : 25dB
The Inse.Loss: 0.3dB
3.2 Nonreciprocal Latching Phase Shifter
The frequency from Band K to Band S
The phase stepping grade: 3digit 4digit 5digit 7digit
The Inse.Loss 0.8dB
The switchover time 3-15μs
Microwave Ferrite Products (4) The rotator of polarization plane
The usage: used on the satellite receiving system for the family on ground
The technical index: The frequency: 11GHz
The rotational angle: 45°
The Inse.Loss: 0.5dB
Microwave Ferrite Products (5) The Circulator and the isolator used on the communication Band
The usage: used on the microwave communication system
The technical index: The frequency: 4000MHz, 160MHz, 80MHz
The isolation: 20-30dB
The Inse.Loss: 0.2-0.3dB
Microwave Ferrite Products (6) The high power waveguide Junction Circulator
The usage: normally be used as the isolator, the transcribing switch, or can be used to substitute the Differential Phase Shift Circulator, for the series of the products, all the isolation ratio are more than 20dB, and the standing wave ratio are less than 1.2, and other index are as the following.
Microwave Ferrite Products (7) The S Band Differential Phase Shift Latching Switch Circulator:
The exciting power is from 2W to 4W, and can be used on the power program control or as the switch and the isolator. The peak / average value is 200KW/2KW, the Band Width is 10%; the reversed isolation is more than 20dB, the forward loss is less than 0.8dB, the standing wave coefficient is 1.2, and the switching time is 10 μs.
(8) The 3 cm ferrite switch circulator: this product can be used to substitute the gaseous discharge tube, and can be used as the common channel converter on the radar or the microwave communication system, the switching speed and the reliability are much improved. The peak power is more than 80KW, and the average power more than 80 W.
(9) The S Band ferrite: electric modulated attenuator
The usage: it is widely used on the test circuitry of the microwave, can be used as the program control attenuator with high reliability, and the Band width is +/-15%, the Inse.Loss is less than 0.5dB, the dynamic attenuation is more than 60dB, the standing wave coefficient is 1.3.
(10) The nonreciprocal Latching Phase Shifters
The usage: this product is used as the phase regulator to make the phase balanceable 6μs. The frequency range is from 2.7-3.05GHz, the Inse.Loss is 1 dB, and the shifting time is less than 6μs, the converting energy is 500μJ, the peak power is 60 KW, the average power is 60W, the standing wave ratio is 1.3.
(11) The stripline circulator and isolator: the frequency is from 2500MHz to 3500MHz, the Inse.Loss is 0.2dB, the isolation is 25dB, the standing wave ratio is 1.2, the Band width is 20%.
(12) The ferrite microstrip isolator: the frequency range is L,S,C,X Bands, the Inse.Loss is 0.3-0.5dB, the isolation is more than 20dB, the standing wave ratio is 1.3, the bandwidth is from 20% to 30%.
(13) Flange isolator: that is the T junction circulator, the volume is less than the field shift parts, and is lighter, the Inse.Loss is less than 0.2dB, the isolation is 25dB, the standing wave coefficient is 1.15, the bandwidth is 6%.
(14) The three ends stripline switch : the frequency is from 2 to 6GHz, the switching time is 3μs, the bandwidth is 10%, the Inse.Loss is less than 0.4dB, the isolation is much than 20dB, the standing waver ratio is less than 1.25, the switching energy is less than 500μJ, the regulating frequency is from 50 to 5000Hz.
Planar Linear Magnetic Coupler
