Radiation Magnetic Ring
At present, most of the mainstream permanent magnet brushless motors use surface-mounted or embedded magnetic tiles to form a ring-shaped magnetic circuit. However, the splicing magnetic ring has the disadvantages of high processing precision of magnetic tiles, high assembly difficulty, poor stability of magnetic pole transition, and serious motor noise, and the structure requires a frame structure of soft magnetic materials to fix the magnetic tiles, and the loss of magnetic flux is obvious, which has a great impact Motor power factor and efficiency.
The radiation magnetic ring is a kind of ring-shaped permanent magnet with a special orientation. It is magnetized radially around the magnetic ring. It can be widely used in the fields of servo motors, magnetic transmission, magnetic bearings and sensors instead of spliced magnetic rings.
Common magnetization methods for radiation magnetic rings
The main advantages of radiating magnetic rings include:
1. The radiation ring is an integral magnetic ring, the dimensional accuracy is better controlled, and the assembly process is simplified;
2. The surface field is sinusoidal, evenly distributed, and the transition zone between magnetic poles is small, so the motor runs stably and the noise is low;
3. The magnetization method and magnetic field distribution are various, and the magnetic circuit design is more flexible.
Radiation magnetic rings can be divided into magnetic field orientation and pressure-oriented magnetic rings according to the orientation method. Among them, sintered or bonded magnetic rings are mostly magnetic field-oriented, and hot-pressed/heat-deformed magnetic rings are mostly pressure-oriented. According to the material, it can be divided into: ferrite permanent magnet ring, rare earth permanent magnet ring and other permanent magnet rings, among which the rare earth permanent magnet ring mainly includes samarium cobalt permanent magnet ring and neodymium iron boron permanent magnet ring, and the highest magnetic performance is sintered or Hot-pressed/heat-deformed NdFeB magnetic ring. According to the shape, the inner and outer diameter ratio is less than 0.7 is a thick-walled ring, and the inner and outer diameter ratio is greater than 0.9 is a thin-walled ring.
Radiation Magnetic Ring
Due to the relatively mature bonding process and low price, the output of bonded NdFeB radiation rings accounts for the largest proportion. However, the density and performance of the bonded magnetic ring are low, and high-end application scenarios are limited. However, for high-performance sintered and hot-pressed/hot-deformed NdFeB magnetic rings, there is a large difference in the shrinkage ratio and thermal expansion coefficient between the easy magnetization axis and the hard magnetization axis of the NdFeB grains, so in the preparation, magnetization and The assembly process is extremely fragile, the yield is low, and the price is generally high. Japan carried out the development of radiation ring equipment and technology earlier, and its equipment accuracy and stability, as well as product grades have great advantages. The research on radiation rings in China started relatively late, but at present, many enterprises and scientific research institutes have been able to stably supply magnetic radiation ring products of various sizes and grades.
The material and advantages and disadvantages of radiation magnetic ring
Regarding the size of the radiation ring magnet, generally speaking:
Bonded radiating rings are less limited by size;
Most of the hot-pressed radiation rings are thin-walled magnetic rings, with a diameter of less than 30mm and a wall thickness of less than 3mm;
Sintered radiant rings can produce products with an outer diameter greater than 200mm, a wall thickness of more than 5mm, and a height of less than 50mm. However, due to the qualification rate and cost constraints, most of the magnetic rings on the market are small-diameter magnetic rings with an outer diameter of less than 100mm.
The following table is the product grade list of “Sintered NdFeB Radiation Magnetic Ring” standard of Baotou Rare Earth Product Quality and Standardization Association. Purchasers can choose reasonably according to comprehensive factors such as product size, performance and cost performance.
sintered ndfeb magnetic radiation ring various grades
#NdFeB #Rare earth permanent magnet#Strong magnetic#Magnetic steel#Magnet#Magnet#Magnetic material#Neodymium magnet#Motor magnetic steel#Rare earth permanent magnet motor#Permanent magnet#Magnetic material#Looking for magnetic material#Neodymiummagnet #magnet # 3c magnetic steel#New energy motor magnetic steel#Industrial motor magnetic steel#Servo motor magnetic steel#High-efficiency energy-saving motor magnetic steel#Linear motor magnetic steel#Traction machine magnetic steel#Compressor magnetic steel#Horn magnetic#Magnetic separator# Wind turbine magnetic steel#Magnetic component#Magnetic component#Motor rotor#Motor stator#Radiation ring
PTFE SQUARE Magnetic Stir Bars
Crosshead Stirrer Magnets Double Side
PTFE Beaker Bar Magnetic Stirrer
Color-coded Teflon Micro Magnets Stir Stirrer Bars
Double Cross Head Teflon Magnetic Stirring Bars
Teflon Egg-Shaped Elliptical Magnet Stirring Bar
Low-friction PTFE Coating Rare Earth Egg Shaped Magnets
Teflon PTFE Triangle Magnet Stir Bars
X Shape Magnet Stir Bar Alnico
Heavy Duty PTFE Stir Bar Cylindrical Style Magnets
