Temperature Performance of Neodymium Magnets
Neodymium magnets are a very widely used type of rare-earth permanent magnets. Due to their extremely high magnetic properties, neodymium magnets have a wide range of applications in industry and daily life. However, the magnetic properties of neodymium magnets are sensitive to temperature, so understanding their temperature limitations is essential for use and storage.
Neodymium magnets have an extremely high magnetic energy product (BHmax) at room temperature, which makes them the strongest commercially available magnets. Their strong magnetic properties have led to a wide range of applications in electronics, motors, sensors and medical devices. However, one of the main drawbacks of neodymium magnets is their sensitivity to temperature.
Temperature Performance of Neodymium Magnets
Curie temperature is the temperature at which a material loses its magnetic properties. For neodymium magnets, the Curie temperature is usually between 310°C and 370°C. Above this temperature, neodymium magnets will completely lose their magnetic properties. This is an irreversible process and the magnet cannot regain its magnetic properties even after cooling.
The maximum operating temperature is the highest temperature at which a magnet can continue to operate without significant loss of magnetic properties. For neodymium magnets, this temperature range is usually between 80°C and 230°C, depending on the grade of magnet. Different grades of neodymium magnets have different temperature stability. For example, N35 magnets have a maximum operating temperature of about 80°C, while N52 magnets have a maximum operating temperature of about 60°C. High-temperature grades of neodymium magnets, such as H, SH, UH, EH, and AH, have maximum operating temperatures that can reach 150°C to 230°C.
Neodymium Magnet Grade Characteristics Table
Neodymium Magnet Grade Characteristics Table
The performance of neodymium magnets at high temperatures decreases mainly in the following aspects:
1. Decrease in coercivity (Hc): The coercivity of neodymium magnets decreases with increasing temperature. This means that magnets are more easily demagnetized at high temperatures.
2. Decrease in Magnetic Flux Density (Br): Higher temperatures cause a decrease in the residual magnetic flux density of neodymium magnets, which reduces their magnetic field strength.
3. Decrease in magnetic energy product (BHmax): The magnetic energy product of neodymium magnets also decreases significantly at high temperatures.
In some applications, neodymium magnets inevitably need to work in high temperature environments. For example, in electric cars and wind turbines, the motor generates a lot of heat when it works, and the magnet must be able to withstand these high temperature environments. To solve this problem, the following measures can be taken:
1. Selection of high-temperature grade magnets: according to the specific application requirements, select appropriate high-temperature grade magnets, such as SH, UH, EH, etc.
2. improve the cooling system: add cooling system in the equipment design to ensure that the magnet working temperature does not exceed its maximum working temperature.
3. Use alternative materials: In extreme high temperature environments, consider using other types of magnets, such as samarium cobalt (SmCo) magnets, which have better high temperature performance, but slightly lower magnetic properties than neodymium magnets.
Dia 43mm TPE NdFeB Cable Holding Magnet System
Dia 31mm NdFeB Black Rubber Magnetic System for Cable Mounting
Magnetic Cable Tie Clip System Ø31mm
31mm Plastic Coated Cable Tie Magnet System
18mm Rubber Coated Cable Tie Mount Magnet
Rubber Neodymium Magnet Cable Holder Dia. 18mm
22mm Dia x 6mm High Rubber Coated Cable Holding Magnet
Cable Tie Mounting Magnet Ø 22mm
Enclosed Vibration Motor Magnet in Mobilephone Smartphone Watch
