Drawer Type Magnetic Grills
Drawer Type Permanent Magnetic Grills are used for the separation of iron particles from dry, granular or free-flowing products/materials. Drawer Magnetic Grills are made by using stainless steel having (Round or square or rectangular) with magnetic rods mounted on the drawer.
The Drawer Type grills are made up of magnetic elements, which are fitted in a drawer and is moving in a housing. Magnetic Elements are made up of hard ferrite ceramic magnets or high-intensity rare earth magnets ( NdFeB ). All the components are made up of Stainless Steel 304/316 material. The overall construction of the magnetic grills can also be made as per the customer specification and sizes
The grills are efficiently utilized if contamination is within 1% to 1.5% by weight. For higher levels of contamination Drawer Grills or Multi Drawer Grills should be used.
Low-Intensity Magnetic Grill having Gauss value of approximately 2,500 Gauss are ideal for trapping contamination such as Nuts, Bolts, Screws, broken washers, etc. these grills are designed to attract larger iron pieces from a relatively larger distance.
Medium Intensity Magnetic Grill having Gauss value of approximately 6,500 Gauss are used where the contamination is in particle form, however, there may or may not be a continuous flow of material to be separated. The contamination size may be as low as 150 microns but not lower than that. The material should be free-flowing and non-sticky.
High-Intensity Magnetic Grill having Gauss value of approximately 11,000 Gauss are employed at locations where the separation of contamination particles as small as 1 micron is required. These grills have been designed to attract super fine particles from the carrier material.
Super High-Intensity Magnetic Grill having Gauss value of approximately 12,000 Gauss are available. In all the four classes of the grill, it is necessity to clean the grills at regular intervals. It is recommended to clean the grill thoroughly before every pass (or as scheduled as per users’ requirements and experience). More accumulation of Iron particles for a long time will reduce the effectiveness of the grill. For the highest attraction, the grill needs to be fully clean.
Drawer Type Magnetic Grills
Standard Size Drawer Type Magnetic Grill:
Single Drawer Magnetic Grill Drawing:
High-intensity Single Drawer Magnetic Grill (11,000 ± 500 Gauss)
Model No. A (mm)
Dia. B (mm)
HT. C
(mm) D
(mm) No.Of
Magnetic
Elements
HSDG1 100 165 156 173 3
HSDG2 150 165 206 223 4
HSDG3 200 165 256 273 5
HSDG4 250 165 306 323 6
HSDG5 300 165 356 373 6
HSDG6 350 165 406 423 7
HSDG7 400 165 456 473 8
Dimensions of Inlet & Outlet Connecting Flanges
Model No. Flange O.D.E(mm) Hole Dia.(mm) No. Of Holes Hole PCD(mm) Flange THK.F(mm)
HSDG1 228.6 19.0 8 190.5 6
HSDG2 279.4 22.2 8 241.3 6
HSDG3 342.9 22.2 8 298.4 6
HSDG4 406.4 25.4 12 361.9 6
HSDG5 482.6 25.4 12 431.8 6
HSDG6 533.4 28.6 12 476.2 6
HSDG7 596.9 28.6 16 539.7 6
Super High intensity Single Drawer Magnetic Grill (12,000 ± 500 Gauss)
Model No. A (mm)
Dia. B (mm)
HT. C
(mm) D
(mm) No.Of
Magnetic
Elements
SHSDG1 100 165 156 173 3
SHSDG2 150 165 206 223 4
SHSDG3 200 165 256 273 5
SHSDG4 250 165 306 323 6
SHSDG5 300 165 356 373 6
SHSDG6 350 165 406 423 7
SHSDG7 400 165 456 473 8
Dimensions of Inlet & Outlet Connecting Flanges
Model No. Flange O.D.E(mm) Hole Dia.(mm) No. Of Holes Hole PCD(mm) Flange THK.F(mm)
SHSDG1 228.6 19.0 8 190.5 6
SHSDG2 279.4 22.2 8 241.3 6
SHSDG3 342.9 22.2 8 298.4 6
SHSDG4 406.4 25.4 12 361.9 6
SHSDG5 482.6 25.4 12 431.8 6
SHSDG6 533.4 28.6 12 476.2 6
SHSDG7 596.9 28.6 16 539.7 6
Standard Size Double Drawer Magnetic Grill Drawing:
Double drawer magnetic grill
High-intensity Double Drawer Magnetic Grill(11,000 ± 500 Gauss)
Model No. A (mm)
Dia. B (mm)
HT. C
(mm) D
(mm) No.Of
Magnetic
Elements
HDDG1 100 250 156 173 5
HDDG2 150 250 206 223 7
HDDG3 200 250 256 273 9
HDDG4 250 250 306 323 9
HDDG5 300 250 356 373 11
HDDG6 350 250 406 423 13
HDDG7 400 250 456 473 15
Dimensions of Inlet & Outlet Connecting Flanges
Model No. Flange O.D.E(mm) Hole Dia. (mm) No. Of Holes Hole PCD(mm) Flange THK.F(mm)
HDDG1 228.6 19.0 8 190.5 6
HDDG2 279.4 22.2 8 241.3 6
HDDG3 342.9 22.2 8 298.4 6
HDDG4 406.4 25.4 12 361.9 6
HDDG5 482.6 25.4 12 431.8 6
HDDG6 533.4 28.6 12 476.2 6
HDDG7 596.9 28.6 16 539.7 6
Super High intensity Double Drawer Magnetic Grill (12,000 ± 500 Gauss)
Model No. A (mm)
Dia. B (mm)
HT. C
(mm) D
(mm) No.Of
Magnetic
Elements
SHDDG1 100 250 156 173 5
SHDDG2 150 250 206 223 7
SHDDG3 200 250 256 273 9
SHDDG4 250 250 306 323 11
SHDDG5 300 250 356 373 13
SHDDG6 350 250 406 423 13
SHDDG7 400 250 456 473 15
Dimensions of Inlet & Outlet Connecting Flanges
Model No. Flange O.D.E(mm) Hole Dia. (mm) No. Of Holes Hole PCD(mm) Flange THK.F(mm)
SHDDG1 228.6 19.0 8 190.5 6
SHDDG2 279.4 22.2 8 241.3 6
SHDDG3 342.9 22.2 8 298.4 6
SHDDG4 406.4 25.4 12 361.9 6
SHDDG5 482.6 25.4 12 431.8 6
SHDDG6 533.4 28.6 12 476.2 6
SHDDG7 596.9 28.6 16 539.7 6
Customized Double Drawer Type Magnetic Grill:
Industries using Magnetic Grill:
Plastic
Food Products. (Sugar, Coffee, Tea, Grains, Pulses, Flour, Spices, Milk, etc.)
Pharmaceutical
Chemical
Ceramic
Colors / Paints
Pigments
Ink
Refractory
Mineral
Other Types Of PML Magnetic Grill:
Product Features:
All construction element of the grill magnet are in S.S. 304/ S.S.316
Customized grill designs and magnetic grid designs available.
Medium and High-intensity Grills with Maximum operating temperature 250ᵒC also available.
High-intensity Drawer Type Grill with Maximum operating temperature up to 350ᵒC also available with SMCO (Samarium Cobalt Magnet).
304 Stainless Steel Square Hopper Magnet at Best Price 3 Bars 1-Layer
8 inch Round Magnetic Grate Strong Neodymium Magnet Separator Double Layers
12 inch Square Magnetc Grate Separator Neodymium Iron Boron 7 Rods
Magnetic Grills Hopper Magnet 7″ Round 1-Row
8 inch Square Magnetic Grill Separator Filter with Angular Baffles 4 Rods 2 Rows
