Self Cleaning Drawer Magnetic Grills
Self cleaning Drawer Type Permanent Magnetic grill are used for the separation of iron particles from dry, granular or free-flowing products/materials. Drawer Magnetic Grills are made by using stainless steel having (Round or square or rectangular) with magnetic rods mounted on the drawer.
The Self cleaning Drawer Type grills are made up of magnetic elements, which are fitted in a drawer and are moved in a housing. Magnetic Elements are made up of high-intensity rare earth magnets ( NdFeB ). All the components are made up of Stainless Steel 304/316 material. The overall construction of the magnetic grills can also be made as per the customer specification and sizes
The grills are efficiently utilized if contamination is within 1% to 1.5% by weight. For higher levels of contamination Drawer Grills or Multi Drawer Grills should be used.
High-Intensity Magnetic Grill having Gauss value of approximately 11,000 Gauss are employed at locations where the separation of contamination particles as small as 1 micron is required. These grills have been designed to attract super fine particles from the carrier material.
The Magnetic grill is supplied with the pneumatic cylinders, FRL Unit & Timer with Operating button for controlling the cleaning.
Cleaning Operation
Start: After manually or electrically actuating the solenoid, the cylinders retract, pulling the magnetic tubes through the stripper assembly to deposit the collected tramp iron outside of the product flow area
Finish: The cylinders return to the run position, pushing the magnetic tubes back into the housing (working position)
Schematic drawing for Single stage self cleaning grill
Self cleaning single drawer drawing
Self Cleaning Drawer Magnetic Grills
SINGLE STAGE SELF CLEANING GRILL
Model No. Inlet & outlet Dia.(mm) Total HT.(mm) No. Of Magnetic Elements Flange O.D.(mm) Hole Dia.(mm) No. Of Holes Hole PCD(mm) Flange THK.(mm)
SCG1 100 300 3 228.6 19 8 190.5 6
SCG2 150 300 4 279.4 22.2 8 241.3 6
SCG3 200 300 5 342.9 22.2 8 298.4 6
SCG4 250 300 5 406.4 25.4 12 361.9 6
SCG5 300 300 6 482.6 25.4 12 431.8 6
SCG6 350 300 7 533.4 28.6 12 476.2 6
SCG7 400 300 8 596.9 28.6 16 539.7 6
Schematic drawing for Double stage self cleaning grill
Self cleaning double drawer magnetic grill drawing
DOUBLE STAGE SELF CLEANING GRILL
Model No. Inlet & outlet Dia.(mm) Total HT.(mm) No. Of Magnetic Elements Flange O.D.(mm) Hole Dia.(mm) No. Of Holes Hole PCD(mm) Flange THK.(mm)
DSCG1 100 400 5
228.6 19 8 190.5 6
DSCG2 150 400 7
279.4 22.2 8 241.3 6
DSCG3 200 400 9
342.9 22.2 8 298.4 6
DSCG4 250 400 9
406.4 25.4 12 361.9 6
DSCG5 300 400 11
482.6 25.4 12 431.8 6
DSCG6 350 400 13
533.4 28.6 12 476.2 6
DSCG7 400 400 15
596.9 28.6 16 539.7 6
Product Features:
Self cleaning, air operated, for remote installations, frequent cleaning, or fully automated system
Removable Collection tray
Removes Micron size iron contamination
Wear resistant tube treatment and special wiper seals for abrasive products
Customized grill designs and magnetic grid designs available.
FDA approved Food grade gasket material
Finish and welding treatments available for food and sanitary grade applications
Matching companion Flanges for easy installation.
316L stainless steel construction
Custom housing designs for magnet in hopper or angled chute installations
The air-actuated stripper seal assembly discharges collected tramp metal into a catch pan as the drawer opens.
High-intensity Drawer Type Grill with Maximum operating temperature up to 350ᵒC also available with SMCO (Samarium Cobalt Magnet).
6″ x 6″ Permanent Hopper Magnet Grill with 304 Stainless Steel 5 Rods
Square Neodymium 304 Stainless Steel Magnetic Separator Grid 8 Rods
