ELECTRO PERMANENT LIFTING MAGNETS
SAFE LIFTING OF STEEL LOADS
HM1 – FIX ELECTRO PERMANENT MAGNETIC BEAM
Complete range of electro permanent lifting magnets for lifting steel plates in lengths from 6-9-12-16 m in thicknesses from 5 mm on.
HM2 – TELESCOPIC ELECTRO PERMANENT MAGNETIC BEAM
Efficient lifting of steel plates in limited spaces starting from 5 mm thickness. Magnetic module selection depending on the length of the steel sheet.
HM3 – ELECTRO PERMANENT MAGNETIC BEAM FOR THIN SHEETS
Electro permanent magnetic beams developed for lifting of thin steel Sheets starting from 3 mm thickness. Ideal for loading laser cutting machines.
HM4 – ELECTRO PERMANENT MAGNETIC BEAM FOR VERTICAL LIFTING
The ideal solution for space-saving vertical storage of steel plates with the possibility to load cutting machines horizontally.
HM5 – ELECTRO PERMANENT MAGNETIC BEAM FOR CUTTED PARTS
Electro permanent magnetic Beam to unload cutting machines in one movement generates time saving…
HM6 – ELECTRO PERMANENT MAGNETIC BEAM FOR MULTIPLE SHEETS LIFTING
For lifting stacks of Sheets with simple function to release Sheet by Sheet.
HS – ELECTRO PERMANENT MAGNETIC BEAM FOR LIFTING PROFILES
Electro permanent magnetic beams for lifting HEA-HEB-IPE-IPN profiles in lengths up to 24,000 mm
HT – ELECTRO PERMANENT MAGNETS FOR ROUND TUBES (SINGLE AND LAYER)
The special design of the V-shaped pole base, combined with an extra strong magnetic field ensures safe lifting of round tubes.
HC – ELECTRO PERMANENT MAGNETS FOR HORIZONTAL AND VERTICAL COILS
For lifting Coils with horizontal or vertical Eye. Lift without risk of damage the Coils. Space-saving solution…
HB – ELECTRO PERMANENT MAGNETIC MODULES FOR LIFTING SLABS AND BILLETS
Powerful electro permanent magnetic Modules for lifting steel Blocks with large Air gap.
THE SAFEST LIFTING MAGNET
ELECTRO PERMANENT MAGNETIC TECHNOLOGY
The electric current is only used to invert the magnetic field, while the effective force is generated by permanent magnets. In the event of a power failure, the magnetic force remains permanently present = 100% safe
Lifting is done in 2 phases, whereby the workpiece is first lifted at a lower preset force, immediately followed by FULLMAG (100% of the total force)
SPC-SYSTEM (SYSTEM PERFORMANCE CHECK)
The electronic system continuously monitors the proper functioning of the magnet. Any abnormal situation is reported immediately and indicated by an error code on the help screen. In this way, errors can be immediately analysed and resolved.
SAFETY FACTOR 3:1
To lift safely, a possible air gap between the contact surface of the magnet, and the steel to be lifted, must be considered. That is why all our magnets are designed with a minimum safety factor of 3: 1 measured at an air gap of 0.4 mm.
2 BUTTON OPERATION
To start the demagnetization cycle, 2 buttons (SAFE + DEMAG) must be pressed consecutively on the remote control.
The status of the magnet is visually indicated by a clear LED lamp block. The load may only be moved when the green lamp lights up continuously!
An inductive proximity switch and associated cam, mounted on the harp shackle of the hoisting chain, prevents accidental demagnetizing in the air.
RADIO REMOTE CONTROL
The magnet is operated from a safe distance. The operator should not come in the immediate vicinity of the load.
With clear safety instructions for the user regarding:
– Maximum weight of the load in function of material thickness
– Maximum wing in function of the deflection of the material.