Magnetic Shuttering System
Magnetic Shuttering Solutions for Precast Concrete Formworks, Shuttering Magnetic box,Precast Concrete Formwork Magnet, Formwork Magnet, Magnetic Formwork System, Formwork System Magnet, Precast Concrete Shuttering Magnet
Magnetic shuttering solutions for precast concrete formworks!
The precast concrete industry has been searching for a more economical and efficient formwork method. In the past, some conventional magnets were used to position and fasten the formwork, but considerable mechanical loads with a hammer were required, which was easy to damage the magnets and the surface of the expensive formwork tables as well. In order to facilitate the formwork activities, UPMAG is developing and manufacturing our own shuttering magnet to solve this problem successfully.
Our shuttering magnet provides quick operation leading to improved efficiency when setting out and breaking down the formwork. It consists of a switchable NdFeB magnet unit and a steel casing which forms a certain designed magnetic circuit. By pressing the button on top of the steel casing, this magnetic force is activated so that this magnet can fasten the formwork to the steel table tightly. In a deactivated mode, the magnet is easy to position. By means of two threaded holes integrated on the top, this magnet can be equipped with various adapters, which can provide unlimited options for use.
． Use with wood or steel formworks
． Easy to operate
． Simple and exact positioning
． Adhesive force ranging from 450 Kg to 2100 Kg
． Avoid welding or bolting to the formwork table therefore preserving surface finish
． Same magnet can be used for different purposes
． Intergrated threaded holes to adapt formwork
． Adapters to be custom made
KEY BENEFITS OF Precast Shuttering Magnet:
1. Reducing the complexity and time of the installation of formwork (up to 70%).
2. Universal use for mass production of concrete products, and piece products of all forms on the same steel table.
3. Eliminates the need for welding, shuttering magnets does not damage the steel table.
4. Makes it possible to produce radial products. Formwork Shuttering Magnet for Precast Plant
5. A small cost of a set of magnets. The average payback of about 3 months.
6. The main advantage of the shuttering magnets is that you do not need to have a lot of different forms for different products, you need to have a set of magnets, adapters for different height boards and steel table.
Concrete Magnet Lever, Crowbar for Shuttering Magnet, Shuttering Magnet Lever Tool, Magnet Box Lever, Precast Formwork Magnets Lifting Level China Supplier
The Shuttering Magnet also named precast concrete Magnetic Box are made of super strong neodymium magnetic system inside of the steel case. It can be activated by simply pressing down the button by the hand or foot. To deactivate them, the magnets are easily released by release lever (to pull the button on). In the inactive position, the shuttering magnets can be easily removed from the table form.
Magnet Release Levers are available for all models of Push-button Magnets and for U-shape magnets.
This lifting tool is for shuttering magnets of our line, it is strong available for all our shuttering magnets.
With this tool,it is convenient for you to use our shuttering magnets freely and help you out from awkward hand power.
We can make different type with customs requirement Shuttering Magnet Levers.
Precast Shuttering Magnet Adapter, Steel Adaptor, Magnetic Box Adaptor, Shuttering Magnet Steel Adapters, precast steel adaptor with magnetic box to fix different formwork, Concrete Formwork Magnet Adaptors & Adapters China Supplier
Formwork Shuttering Magnet Adaptor & Adapter
(Mounting elements of board equipment)
Complex shuttering system (Shuttering Magnets) is based on Unit with magnet and upper works in the form of Adapters.
Adapters represent possibility to exhibit the advantages of MAGNETIC SHUTTERING to the full extent such as:
Manufacturing of items 60 to 500 mm
Manufacturing of any level items of complex and radial shape
Fixing of board equipment to pallet without welding
Board equipment mounting time saving up to 70%
Not any longer exists necessity of warehouse storage of big number of standard forms, as a result, giant economy at manufacturing of new items
Cheapening at manufacturing of piece and finishing accessories to 20%
We offer various Adapters, both serial and produced according to drawings of the customer.
Used with our shuttering magnets together, high strength, good rigidity, special edge tooth design can close engagement with the magnetic chuck , strong coupling, in under the action of external force does not produce any gap, loose, make the final concrete wallboard quality to achieve the optimal.
Precast produced shuttering magnet adapter LC which is simply usage for the wooden formwork head onto shuttering magnet. When the precast concrete need to cast on the steel platform, the wooden need to fix into steel platform.
Material: Q215, Q235 Iron Parts
Surface Treatment: Black / Yellow Oxidation Treatment
Magnetic Box Adaptor is a steel bracket for fixing the unit shuttering magnets to the steel panel when manufacturing precast concrete panel wall. The adaptor is fixed with two screws on the magnetic box simply. It’s customized to produce according to customers shutter system specifications.
We can make different type with customs requirement.
Shuttering magnet is consist by neodymium block magnet, and steel house,the magnet is very big size thus the magnetic force is very large.
Precast magnet box, a magnetic tool to hold concrete formworks. After setting the magnet to the formwork,concrete could be inject into the formwork, The concrete will be formed trimly just as the formwork likes.Shuttering magnet is made of big block Neodymium Magnet and the steel house, there are two hex bolt and a round handle button on the top of the Precast Concrete Magnet, the hex bolt is for fixed with adapter and handle button is for push to use.