Magnetic Steel and Plastic Chamfers

Chamfers are used to create precisely bevelled chamfer formation in precast concrete products.

The magnetic steel chamfers are fabricated from C1018 cold-rolled steel that is milled out to allow for the permanent installation of magnets. Steel magnetic chamfer is available in 1/2”, 3/4”, and 1” versions and are all 10’ long. Using the same basic steel chamfer, we can also furnish reveals with the magnets in the hypotenuse.

The magnetic plastic chamfers are manufactured with 90 durometer urethane in 8’ lengths. All three sizes are also available in 60 meter material or in 10’ lengths. The 90 durometer plastic chamfer material is excellent in long line and straight uses and can also be used in a majority of large radius curved and round applications. As a custom order, 1/2” and 3/4” plastic magnetic chamfer is available in 60 durometer hardness where the chamfer needs to be used in a tight radius curved or round forming application.

Magnetic Steel and Plastic Chamfers

Magnetic Steel and Plastic Chamfers

 

Low Cost NdFeB ERM Vibration Motor Magnets N38

Eccentric Rotating Mass (ERM) Industrial Vibration Motor NdFeB Magnets N48

Precision Vibration Motor Magnet Coin N52 Neo

Neo Micro Ring Magnets N48 for Coin Vibrator Motor

Ring Neodymium Precision Magnets N45 for Coin Vibration Motor

Tiny Ring Magnets N50 for Micro Coin-Type Vibration Motors

N42H Flat Coin Magnet for Cell Phone Vibrating Motor

N48 Flat Coin Vibration Motor Magnets

Magnetic Stirrer Bar Retriever

Pivot Ring Magnetic Stir Bars

Made In China Mini Linear Actuator Magnet in Ac Linear Motor

Magnetic Chamfer

Magnetic Formwork System

Ferrite Radial-Oriented Multipole Magnetic Ring